Item Description
RAY ATTACHMENTS Earth Auger is a kind of CZPT hole device. It can be mounted to all common hydraulic excavators as well as mini excavator and other carrier like skid steer loader, backhoe loader,telescopic handler, wheel loader and other equipment.Our auger travel can mounted with earth drill, stump planner, mixer bowl for diverse makes use of.
Specification:
| Model | Oil Folw | Max Torque | Pressure | Rotary Speed | Carrier | Oil Hose | Drill Dia. | |||
| gal./min | I/min | Lbf·Ft | N·M | Psi | Bar | Rpm | T | Inch | mm | |
| REA2000 | six-fourteen | 23-fifty three | 2537 | 1871 | 3000 | 205 | forty-92 | 1-2.5 | one/2 | a hundred-400 |
| REA2500 | eight-16 | thirty-61 | 3297 | 2432 | 3000 | 205 | 40-82 | 1.5-three | one/two | 100-500 |
| REA3000 | eight-16 | thirty-sixty one | 3900 | 2877 | 3500 | 240 | 40-81 | 2-3.five | 1/two | one hundred-600 |
| REA3500 | eight-eighteen | thirty-68 | 4900 | 3614 | 3500 | 240 | 32-seventy two | 2.5-4.5 | 1/2 | a hundred-750 |
| REA4500 | ten-twenty | 38-seventy six | 5719 | 4218 | 3500 | 240 | 32-64 | 3-five | one/two | one hundred-900 |
| REA5000 | 10-20 | 38-seventy six | 6855 | 5056 | 3500 | 240 | 29-fifty eight | four.5-7 | 1/two | one hundred fifty-600 |
| REA5500 | twelve-22 | forty five-eighty three | 8012 | 5910 | 3500 | 240 | 28-50 | five-seven | 1/two | 150-750 |
| REA6000 | 12-28 | forty five-106 | 8338 | 6150 | 3500 | 240 | 34-80 | six-eight | 3/4 | a hundred and fifty-900 |
| REA7000 | 16-32 | 61-121 | 9397 | 6931 | 3500 | 240 | 37-72 | seven-10 | three/4 | 150-900 |
| REA8000 | 16-36 | 61-136 | 1571 | 8048 | 3500 | 240 | 29-sixty four | 8-12 | three/4 | a hundred and fifty-900 |
| REA10000 | 18-36 | 70-136 | 14612 | 1571 | 3500 | 240 | 26-forty five | 10-13 | 3/4 | 150-900 |
| REA12000 | 21-37 | eighty-140 | 16236 | 11976 | 3500 | 240 | 22-forty three | thirteen-seventeen | 1 | 150-900 |
| REA15000 | 21-40 | eighty-151 | 20399 | 15046 | 3500 | 240 | twenty-39 | thirteen-seventeen | one | 150-1200 |
| REA20000 | 21-forty five | eighty-one hundred seventy | 25812 | 19039 | 3500 | 240 | seventeen-34 | 13-20 | 1 | a hundred and fifty-1200 |
| REA25000 | 24-forty eight | ninety-a hundred and eighty | 33825 | 24949 | 3500 | 240 | 16-30 | 15-23 | 1 | 150-1200 |
| REA50000 | 26-74 | a hundred-280 | 68052 | 50195 | 4000 | 280 | 11-thirty | 21-fifty | one | three hundred-2400 |
Aslo, these particulars just support you know our merchandise swiftly. You should truly feel free of charge to contact with me ,that is my responsibility and honor to assist you locate the acceptable merchandise.
Packed in robust wooden box, Not easy to be damaged throughout transportation.
If you want to promote your own brand, We can also provide OEM service .(custom your own brand, color, shape and so on you requested)
If you have these business, feel free to contact us. We sincerely invite global dealer!
HangZhou CZPT International Co., Ltd is a professional maker which was found in 2002 has a whole lot of encounter in development machinery attachments creating and serving.Our manufacturing unit is positioned in HangZhou City, ZheJiang Province, Close to to ZheJiang Town. Which has huge ability to make numerous kinds items like hydraulic breaker, earth auger, rapid hitch, Vibro ripper,pile breaker and other building equipment attachments.We are constantly exploring to increase our products’ efficiency and innovate creating to fulfill more and a lot more clients’ calls for.
Q: Are you a maker?
A: Of course,our manufacturing unit was proven in 2002 and we have our own buying and selling business.
Q: Are you confident your merchandise will suit my excavator?
A: Yes, we are specialist about this, you can also tell me your excavator design, and we will verify it for you.
Q: Can you offer customers’ design and style?
A: Positive, we can supply OEM and ODM services.
Q: What is the MOQ and payment terms?
A: MOQ is 1set. Payment via T/T,L/C, Western Union acknowledged, other terms can be negotiated.
Q: How about delivery time?
A: 5-25 perform days right after the payment, depend on your quantity.
Q: How about the bundle?
A: Our earth auger packed by polywood case.
Q: Which place have you exported?
A: Vietnam, Saudi Arabia, The united states, Thailand, New Zealand, Canada, Australia, Peru, Chile, Brazil, Mexico, Iran, South Africa, and many others.
| Certification: | CE, ISO 9001:2008 |
|---|---|
| Condition: | New |
| Drill Hole Diameter: | 100mm – 1200mm |
| Drill Hole Depth: | 1m – 30m |
| Bit Type: | Tunsten/Rock/Sharp Teeth |
| Drilling Way: | Rotary |
###
| Customization: |
Available
|
|---|
###
| Model | Oil Folw | Max Torque | Pressure | Rotary Speed | Carrier | Oil Hose | Drill Dia. | |||
| gal./min | I/min | Lbf·Ft | N·M | Psi | Bar | Rpm | T | Inch | mm | |
| REA2000 | 6-14 | 23-53 | 2537 | 1871 | 3000 | 205 | 40-92 | 1-2.5 | 1/2 | 100-400 |
| REA2500 | 8-16 | 30-61 | 3297 | 2432 | 3000 | 205 | 40-82 | 1.5-3 | 1/2 | 100-500 |
| REA3000 | 8-16 | 30-61 | 3900 | 2877 | 3500 | 240 | 40-81 | 2-3.5 | 1/2 | 100-600 |
| REA3500 | 8-18 | 30-68 | 4900 | 3614 | 3500 | 240 | 32-72 | 2.5-4.5 | 1/2 | 100-750 |
| REA4500 | 10-20 | 38-76 | 5719 | 4218 | 3500 | 240 | 32-64 | 3-5 | 1/2 | 100-900 |
| REA5000 | 10-20 | 38-76 | 6855 | 5056 | 3500 | 240 | 29-58 | 4.5-7 | 1/2 | 150-600 |
| REA5500 | 12-22 | 45-83 | 8012 | 5910 | 3500 | 240 | 28-50 | 5-7 | 1/2 | 150-750 |
| REA6000 | 12-28 | 45-106 | 8338 | 6150 | 3500 | 240 | 34-80 | 6-8 | 3/4 | 150-900 |
| REA7000 | 16-32 | 61-121 | 9397 | 6931 | 3500 | 240 | 37-72 | 7-10 | 3/4 | 150-900 |
| REA8000 | 16-36 | 61-136 | 10911 | 8048 | 3500 | 240 | 29-64 | 8-12 | 3/4 | 150-900 |
| REA10000 | 18-36 | 70-136 | 14612 | 10778 | 3500 | 240 | 26-45 | 10-13 | 3/4 | 150-900 |
| REA12000 | 21-37 | 80-140 | 16236 | 11976 | 3500 | 240 | 22-43 | 13-17 | 1 | 150-900 |
| REA15000 | 21-40 | 80-151 | 20399 | 15046 | 3500 | 240 | 20-39 | 13-17 | 1 | 150-1200 |
| REA20000 | 21-45 | 80-170 | 25812 | 19039 | 3500 | 240 | 17-34 | 13-20 | 1 | 150-1200 |
| REA25000 | 24-48 | 90-180 | 33825 | 24949 | 3500 | 240 | 16-30 | 15-23 | 1 | 150-1200 |
| REA50000 | 26-74 | 100-280 | 68052 | 50195 | 4000 | 280 | 11-30 | 21-50 | 1 | 300-2400 |
| Certification: | CE, ISO 9001:2008 |
|---|---|
| Condition: | New |
| Drill Hole Diameter: | 100mm – 1200mm |
| Drill Hole Depth: | 1m – 30m |
| Bit Type: | Tunsten/Rock/Sharp Teeth |
| Drilling Way: | Rotary |
###
| Customization: |
Available
|
|---|
###
| Model | Oil Folw | Max Torque | Pressure | Rotary Speed | Carrier | Oil Hose | Drill Dia. | |||
| gal./min | I/min | Lbf·Ft | N·M | Psi | Bar | Rpm | T | Inch | mm | |
| REA2000 | 6-14 | 23-53 | 2537 | 1871 | 3000 | 205 | 40-92 | 1-2.5 | 1/2 | 100-400 |
| REA2500 | 8-16 | 30-61 | 3297 | 2432 | 3000 | 205 | 40-82 | 1.5-3 | 1/2 | 100-500 |
| REA3000 | 8-16 | 30-61 | 3900 | 2877 | 3500 | 240 | 40-81 | 2-3.5 | 1/2 | 100-600 |
| REA3500 | 8-18 | 30-68 | 4900 | 3614 | 3500 | 240 | 32-72 | 2.5-4.5 | 1/2 | 100-750 |
| REA4500 | 10-20 | 38-76 | 5719 | 4218 | 3500 | 240 | 32-64 | 3-5 | 1/2 | 100-900 |
| REA5000 | 10-20 | 38-76 | 6855 | 5056 | 3500 | 240 | 29-58 | 4.5-7 | 1/2 | 150-600 |
| REA5500 | 12-22 | 45-83 | 8012 | 5910 | 3500 | 240 | 28-50 | 5-7 | 1/2 | 150-750 |
| REA6000 | 12-28 | 45-106 | 8338 | 6150 | 3500 | 240 | 34-80 | 6-8 | 3/4 | 150-900 |
| REA7000 | 16-32 | 61-121 | 9397 | 6931 | 3500 | 240 | 37-72 | 7-10 | 3/4 | 150-900 |
| REA8000 | 16-36 | 61-136 | 10911 | 8048 | 3500 | 240 | 29-64 | 8-12 | 3/4 | 150-900 |
| REA10000 | 18-36 | 70-136 | 14612 | 10778 | 3500 | 240 | 26-45 | 10-13 | 3/4 | 150-900 |
| REA12000 | 21-37 | 80-140 | 16236 | 11976 | 3500 | 240 | 22-43 | 13-17 | 1 | 150-900 |
| REA15000 | 21-40 | 80-151 | 20399 | 15046 | 3500 | 240 | 20-39 | 13-17 | 1 | 150-1200 |
| REA20000 | 21-45 | 80-170 | 25812 | 19039 | 3500 | 240 | 17-34 | 13-20 | 1 | 150-1200 |
| REA25000 | 24-48 | 90-180 | 33825 | 24949 | 3500 | 240 | 16-30 | 15-23 | 1 | 150-1200 |
| REA50000 | 26-74 | 100-280 | 68052 | 50195 | 4000 | 280 | 11-30 | 21-50 | 1 | 300-2400 |
Preventative Maintenance on Tractor Parts
You should not take your tractor out of commission by replacing the parts that are not working properly. You should be proactive about maintaining your tractor parts to ensure that they work well and are of the highest quality. You should also check if the company is 10 years old or more, as this will ensure that they have enough experience to handle warranty issues and any other problems. Lastly, you should check if the tractor parts company has a good reputation. Having a long standing company that is available around the clock is a plus.
Preventative maintenance of tractor parts
Performing preventative maintenance on tractor parts will help you avoid unexpected breakdowns and enhance its efficiency. Whether you’re the sole owner of a tractor or a part-owner, you should know which parts you need and where to find them. Having spares available is also important, as they can help you solve problems quickly. Listed below are some of the parts you need to know about. These components are essential for your tractor’s engine.
To maintain your tractor’s internal components, check for wear. Lubricate internal parts regularly to reduce friction. When possible, bring your tractor to a dealer for a thorough inspection. Additionally, remember to keep the tractor’s air filter clean. Dust in the air strains the tractor’s engine, and a dirty air filter can cause a lot of damage. By following the manufacturer’s instructions for proper maintenance, you can avoid costly repairs down the road.
For oil changes, check the owner’s manual for recommended oil change intervals. Make notes in the manual about the parts you’ll need. You can also refer to the manufacturer’s PM checklist. Depending on the type of tractor you own, you may need to change the oil once a year or more often. To keep your tractor running optimally, drain old oil after every use. The same goes for hydraulic fluid. Over time, it can become contaminated with particles and water. Therefore, it’s best to change it every year.
Modern tractors use a cooling system with fans and radiators. This system operates in varying temperatures and if it breaks down, you risk damaging the engine’s core parts. In addition, you should store your tractor’s battery under climate control. A battery maintainer can be purchased at any auto parts store. It’s a great idea to regularly inspect your tractor’s engine for problems as early as possible.
Types of tractor clutches
In a modern tractor, there are many types of transmission systems, and this article compares the pros and cons of each type. The original drive system of tractors relied on a clutch to change gears and range and engage/disengage the PTO drive. The clutch was usually a two-stage design; a full depression disengaged all drive systems while a partial depression only disengaged the gearbox. Today, these systems are independent.
The friction plate is a steel plate with a splined central hub. It features annular friction facings and is held between the flywheel and pressure plate. It has splines that limit its axial travel along the gearbox’s driving shaft and dampen torsional vibrations. Single-plate clutches are most commonly used in heavy agricultural equipment. While they were initially developed as a cost-effective alternative to drum brakes, they quickly gained popularity due to their low price and ease of use.
Another type of tractor clutch is the wrap-spring. These use a special cast-iron spring. This spring is able to transmit torque to the driven plate when the tractor is operating at normal engine speed, while the clutch springs help transmit torque to the driven plate when the engine is running at high engine speeds. The wrap-spring clutches must be lubricated with light oil and should be checked for deterioration after a few years.
The advantages and disadvantages of these types of clutches are explained briefly. They are generally made from high-quality materials and contain a high copper content. They have high-friction properties and can transfer heat effectively to the engine. The friction coefficient of these types of clutches ranges from 0.33 to 0.4. As a result, they are the best choice for intensive applications. In conclusion, there are many advantages and disadvantages of each type of tractor clutch.
Types of tractor transmission gears
There are several different types of tractor transmission gear. One of the most common is hydrostatic. A hydrostatic transmission works like a standard manual transmission, and operates with a pedal. To operate a hydrostatic transmission, you simply select the gear and engine speed you want, push the pedal, and the hydraulic oil turns the gears. Because this type of transmission is clutchless, it provides smooth forward/backward operation without the need for a manual shifter.
Tractor transmissions come in several types and have different features. Some of these systems are better for certain types of work than others, and you’ll find different types depending on the size and type of your tractor. Many tractors have two types of transmissions: geared speed and power shift. Each type offers different benefits, and they vary in cost and ease of use. There’s a geared speed transmission, a synchromesh transmission, and a power shift transmission.
A CVT (continuously variable transmission) is another popular option. Like hydro, CVTs use a belt to transfer power from the engine to the wheels. These tractors can shift gears with little effort. These tractors can reach up to four speeds without the need for a clutch. Powershift transmissions are simpler and more durable than CVTs. They’re also easier to repair. But a CVT may be the better choice for your farm tractor.
Hydrostatic and power shuttle transmissions allow you to shift gears and direction without the use of a clutch. Hydrostatic transmissions are usually hydraulically actuated, which makes it easy to change gears without using the clutch. Similarly, power shuttle transmissions are great for heavy-duty forward-and-reverse shifting. In either case, the clutches are hydraulically actuated and bathed in oil.
Types of CZPT fittings
In a nutshell, there are two types of CZPT fittings: standard and grease-fill. Standard CZPTs have three to four pumps of grease per fitting. Grease-filled CZPTs tend to attract dirt, dust, and sand, which can damage moving parts. Keeping these parts clean is crucial to their long-term performance. Using a rag to wipe off excess grease is an excellent way to ensure that the seals remain as sealed as possible.
There are different types of grease-filling tools available. Some are specifically designed to clear blocked CZPTs. These tools are used to fill the CZPT fitting with grease or diesel fuel and hit the fitting with a hammer. Be sure to use high-quality fitting rejuvenators, as cheap ones are less effective. These are also harder to find than grease-filling tools. To avoid these issues, use the proper tools when servicing your tractor.
CZPT fittings are used for many different kinds of tractor parts. You may find them on lawn equipment, construction equipment, and farming equipment. If you are unsure of what type your equipment has, ask your local CZPT dealer or visit one of their 17,000 CZPT AutoCare locations. Don’t forget to regularly grease these parts for the best performance. When you don’t have time to do so, they can lead to costly repairs.
Standard CZPTs feature a dome-shaped nipple that makes it easy to spot. Flow-stop fittings feature a ball check valve that reduces backflow during lubrication. Drive-type CZPTs feature a special coupler with a cross-pin to provide a positive lock. This type of grease CZPT eliminates the need for tapping during servicing.
Preventative maintenance of tractor’s CZPT fittings
Proper grease application and regular inspections are important parts of CZPT fittings. If a CZPT becomes stuck in an opening, the ball may not be able to come out. Lubrication around CZPTs is important as grease can damage the components and cause bigger problems. A tractor’s CZPT fittings are part of the tractor’s electrical system, so it is important to replace them when they become damaged.
Grease CZPTs allow the addition of grease at the manufacturer’s specifications. These fittings consist of a spring and metal ball inside a nipple. The grease gun compresses the spring and releases the ball from the nipple opening. Grease CZPTs are essential parts of heavy equipment, as a failed grease CZPT may cause brake failures and other systems to fail. Failure to maintain these fittings can cause rollover accidents.
Greasing the CZPTs is a vital part of regular tractor maintenance. Greasing the CZPTs will prevent your tractor’s bearings from sticking and make your work easier. Grease the CZPTs on pivot points and joints to keep them lubricated and running smoothly. For easy grease application, consider using a battery-powered grease gun. Once you have lubricated the CZPTs, you can move on to other parts of the tractor.
In addition to grease, you should check for leaks on your tractor’s CZPTs regularly. If you notice dirt buildup, there might be a leak. You can also check for any worn hoses to avoid major problems. If there is a leak, tighten the fittings and replace worn ones as soon as possible to avoid further damage. By performing these tasks regularly, you can increase the efficiency of your tractor and avoid unexpected breakdowns.
editor by czh2022-12-27