Greenhouse gear driver

The EP Greenhouse gear driver is a concise and lightweight reduction gear reducer with an integrated limit switch system that is ideal for assembly of a locally available electric engine. The gearbox is utilized in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gearbox is definitely rainproof and windproof. The gear driver has a high protection class (IP65) and can be utilized in an ambient temperature of 0-60 °C.

The low-noise gear reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel tranny ensures that the drive shaft is certainly locked when the decrease gearbox isn’t running. The completely sealed reduction gearbox comes with an growth chamber with a diaphragm to keep carefully the gear essential oil at a low pressure under all circumstances, even at high temperature ranges. Thanks to the use of an expansion chamber, the reducer can be installed in any placement. There are no restrictions, since there is no dependence on a bleed connect. The sealed reduction gear reducer keeps the gear essential oil of the reducer in optimal condition because of its entire operating lifetime. The geared motor is suitable for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction geared motor has an FT85 motor assembly flange, on to which the right IEC standard motor can simply be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed within an built-in chamber and is definitely enclosed by an impact-resistant plastic material cover. The limit change system is obtainable and simple to adjust. The limit change system’s optimum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The reducer for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of program of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 a few minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).

Tags:

Recent Posts