HK kind roller chains

Downsizing Your System with Larger Electrical power Chains
HK sort roller chains conform to H type of ANSI, and their thickness of inner and outer website link plates are equal to people of your next more substantial dimension chain. Thus, HK sort roller chains are increased in tensile power by about 20%and in greatest allowable load by about 15% than people of standard roller chains. Because the excess weight of your chains is additionally larger, HK type roller chains are ideal for your application of heavy duty at very low speed.
Advised uses
?Optimal for destinations in which higher strength is needed but large and heavier chains are not able to be made use of.
Collection of chains
Decide on a correct HK type roller chain based on “Low-speed selection”
For that optimum allowable load, see the following table of dimensions.
HK variety roller chains are available as much as triplex.
Sprockets
Use common sprockets to get a simplex HK roller chain Because the transverse pitches are more substantial than those of common chains while in the situation of duplex or triplex, conventional sprockets are unable to be employed. Refer on the sprocket tooth profiles for HK
Connecting link and offset hyperlink
The tensile power of connecting backlinks and offset backlinks are listed on the left, but the optimum allowable load is reduce than that in the base chain. Please consult us should really you have any inquiries. It is actually proposed to make use of the connecting link of interference-fitted (FJ, HJ)
In no way make the holes from the connecting plate greater and hardly ever make the pins thinner to facilitate the get the job done for fitting the pins in to the connecting plate, since otherwise the fatigue strength is going to be lowered.
Selection of chains
Select a suitable HK form roller chain based on “Low-speed selection”
For your maximum allowable load, see the next table of dimensions.
HK sort roller chains can be found as much as triplex.
Sprockets
Use regular sprockets for any simplex HK roller chain Since the transverse pitches are larger than those of common chains in the case of duplex or triplex, regular sprockets can not be utilised. Refer to your sprocket tooth profiles for HK
Connecting hyperlink and offset website link
The tensile power of connecting backlinks and offset back links are listed around the left, but the greatest allowable load is reduced than that with the base chain. Please seek the advice of us should you may have any inquiries. It really is encouraged to implement the connecting link of interference-fitted (FJ, HJ)
Hardly ever make the holes in the connecting plate greater and never ever make the pins thinner to facilitate the operate for fitting the pins to the connecting plate, since otherwise the fatigue strength will likely be lowered.

Tags:

Recent Posts