Material Handling Energy UNIT two
General Description
This energy unit options energy up gravity down circuit. Activate the start solenoid to begin the motor to lift the machine. The lowing motion is activated from the solenoid valve with all the reducing velocity managed through the stress compensated movement management valve. Solutions of this series can be extensively utilized in the field of logistic products such as fork lift, mini lift table, and so on.
Particular Notes
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean all the hydraulic parts concerned before mounting the electrical power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which need to also be clean and absolutely free of impurities, N46 hydraulic oil is advised .
four. Oil shifting is required soon after the first a hundred operation hrs,afterwards after each and every 3000 hrs.
five. The power unit should be mounted horizontally.
Materials Dealing with Electrical power UNIT one
Basic Description
This electrical power unit is designed to the fork lift marketplace, consisting of very effective gear pump, DC motor, guide raise and reduce valve, tank, ect. The up and down motion are controlled through the lever in the guide release 
valve, and that is outfitted with an electrical switch to activate the motor. The lowing pace is managed through the pressure compensated movement control valve.
Unique Notes
1. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean all the hydraulic components concerned just before set up of the energy unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of impurities, N46 hydraulic oil is advised .
four. Oil modifying is required just after the original a hundred operation hours, afterwards after each and every 3000 hrs.
5. The electrical power unit proven is built to be mounted horizontally.