Consisting of a strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is designed to operate materials handling gear. The decreasing motion is achived through the solenoid valve using the decreasing pace managed by an adjustable needle valve. The left and ideal functions are outfitted which has a dual pilot operated check out valve and cross-over relief valves.
Remark: Please check with our sales engineer for that distinctive pump displacement, motor electrical power or tank capacity.
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean each of the hydraulic parts concerned ahead of installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and absolutely free of impurities.N46 hydraulic oil is suggested.
four. This electrical power unit needs to be mounted horizontal.
five. Check the oil degree inside the tank after the very first begin from the power unit.
six. Oil transforming is required soon after the original a hundred operation hours, afterwards as soon as each 3000 hours.
SNOW PLOW Electrical power UNIT