We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For far more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Introduction:
one. HS series slurry pump is designed for the constant pumping of higher abrasive, high density slurries with small routine maintenance requirements. The donning parts are produced of extremely chrome or and rubber. It will maintain large performance over the use existence of its factors.
two. The metal moist elements and rubber types can be interchangeable for managing distinct liquids or slurries.
3. HS slurry pumps are accessible in dimensions ranging from 1 inch to eighteen inch discharge and feature large effectiveness efficiency able of movement prices from ten.8 to 5400 m³/h and heads up to 125 meters for high head types.
Attributes:
1. Cylindrical construction of bearing assembly: practical to adju EPT the room amongst impeller and EPT liner
and can beremoved comple tel: +86~13 0571 88828y
2. Interchangeable anti-abrasive damp areas produced of substantial-chrome alloys
3. Casing halves of ductile iron with external reinforcing ribs give higher functioning force capabilities
and an added measure of basic safety.
four. The discharge department can be oriented to any eight positions at the interval of 45 degrees
five. Different drive varieties: DC(direct connection), V-belt push, equipment box reducer, hydraulic couplings, VFD,
S EPT manage, and many others
6. The shaft seal uses the packing seal, expeller seal and mechanical seal
Typical Software:
| • Mineral processing | • Mining | • Coal Washery | • Cyclone feeds |
| • Bentonite | • Chemical slurry | • Tailing | • Mill grinding |
| • Ash handing | • Tunnel | • Squander sludge | • Coarse sand |
| • Lime mud | • Phosphoric acid | • Dredging | • Construction |
| • Alumina Market | • Electricity Plant | • Potash Fertilizer Plant | • EPT industries |
| • Iron ore sand | • Copper Concentration | • Gold mine | •Molybdenum |
| Design | Max Electricity (Kw) |
Inlet & Outlet measurement (inch) | Substance for Use Elements | Movement Charge (Q) | Head (H) meter |
Pace (RPM) |
Impeller Dia. (mm) |
|
| m³/hr | l/s | |||||||
| 25HS-B | 15 | one.5/one | M | 12.6~28.8 | three.5~eight | 6~68 | 1200~3800 | 152 |
| R | ten.8~twenty five.2 | three~7 | 7~52 | 1400~3400 | 152 | |||
| 40HS-B | 15 | two/1.5 | M | 32.4~seventy two | nine~twenty | 6~fifty eight | 1200~3200 | 184 |
| R | 25.2~fifty four | 7~fifteen | five.5~41 | 1000~2600 | 178 | |||
| 50HS-C | 30 | three/2 | M | 39.6~86.four | eleven~24 | twelve~sixty four | 1300~2700 | 214 |
| R | 36~75.6 | ten~21 | 13~46 | 1300~2300 | 213 | |||
| 75HS-C | 30 | four/three | M | 86.4~198 | 24~55 | nine~fifty two | one thousand~2200 | 245 |
| R | seventy nine.2~one hundred eighty | 22~50 | 5~34.5 | 800~1800 | 245 | |||
| 100HS-D | 60 | six/four | M | 162~360 | 40~one hundred | 12~fifty six | 800~1550 | 365 |
| R | one hundred forty four~324 | 40~90 | 12~forty five | 800~1350 | 365 | |||
| 150HS-E | 120 | 8/six | M | 360~828 | 100~230 | 10~61 | five hundred~1140 | 510 |
| R | 324~720 | ninety~200 | seven~49 | 400~a thousand | 510 | |||
| 200MS-E | a hundred and twenty | ten/eight | M | 666~1440 | 185~four hundred | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | ten/eight | M | 612~1368 | one hundred seventy~380 | eleven~61 | four hundred~850 | 686 |
| R | 540~1188 | one hundred fifty~330 | twelve~50 | four hundred~750 | 686 | |||
| 250HS-ST | 560 | 12/10 | M | 936~1980 | 260~550 | 7~sixty eight | three hundred~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~forty five | 300~650 | 762 | |||
| 300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | thirteen~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~seven hundred | 13~forty four | 300~five hundred | 965 | |||
| 350HS-TU | 1200 | sixteen/14 | M | 1368~3060 | 380~850 | eleven~sixty three | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/eighteen | M | 2520~5400 | seven-hundred~1500 | 13~fifty seven | two hundred~400 | 1370 |
| 25HHS-C | 30 | 1.5/1 | M | sixteen.2~34.two | 4.5~9.five | twenty five~92 | 1400~2200 | 330 |
| 50HHS-D | sixty | 3/two | M | 68.4~136.eight | 19~38 | twenty five~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | four/3 | M | 126~252 | 35~70 | 12~97 | 600~1400 | 508 |
| 100HHS-E | one hundred twenty | 6/four | M | 324~720 | ninety~200 | thirty~118 | 600~1000 | 711 |
| 150HHS-S | 560 | 8/six | M | 468-1008 | 130~280 | 20~ninety four | 500~a thousand | 711 |
For the content of sporting elements,
“M” = metallic, extremely chromium alloy “R” = anti-abrasive rubber
Speak to
Welcome to get in touch with us any time for details.
Your inquiry will get our prompt attention and response !
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 distinct branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of first tools manufacturer’s (OEM) part numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our business and the shown substitution parts contained herein are not sponsored, accredited, or made by the OEM.
